Out Of Stock
Brand: Atten
Model: 2089
How to USE : 1. The proper tip temperature is from 300°~360°C ( 572°F-680°F )2. Dip the tip in the TIP Refresher.3. Put solder on the tip, Clean the tip completely with the sponge on the soldering iron stand ( good ST series ).4. Put solder on the tip again, now the tip wetting is restore..
Rs.199
Model: 1894
Iron Pen For Kada SMD BlowerPackage Content*1x Iron Pen For Kada SMD Blower..
Rs.450
-25 %
Brand: Sugon
Model: 2393
Iron Pen For Sugon 202 SMD BlowerPackage Content*1x Iron Pen For Sugon 202 SMD Blower..
Rs.450 Rs.600
Out Of Stock
Model: 1891
Iron Pen For T12 / T12D / T12D+Package Content*1x Iron Pen For T12 / T12D / T12D+..
Rs.650
Out Of Stock
Brand: OSS Team
Model: 2317
Iron Pen For T12X Iron Station By OSS Without BitPackage Content*1x Iron Pen For T12X Iron Station By OSS Without Bit..
Rs.600
Out Of Stock
Brand: OSS Team
Model: 2316
Iron Pen For T210 Iron Station By OSS Without BitPackage Content*1x Iron Pen For T210 Iron Station By OSS Without Bit..
Rs.650
Out Of Stock
Model: 1187
Iron Tip CleanerPackage Content*1x Iron Tip Cleaner..
Rs.140
-21 %
Brand: Mechanic
Model: 1999
Description:1: Mechanic 4 in 1 900M-T-C6 universal heating repair platform for T12 JBC-210/245 soldering station, Mechanic C6 Mini heat-gathering honeycomb structure heating table, C6 heating platform for JBC-210/245 soldering tip.2: Mechanic 900M-T-C6 Honeycomb Micro-soldering Station For BGA PCB S..
Rs.380 Rs.480
-28 %
Brand: Mechanic
Model: 2136
Mechanic C9+ Heating Platform IC Glue RemoverProducts Details:Rapid Temperature RiseLead-free constant temperatureUniversal 936/210/T12 Series Desoldering StationFeatures:Easy to remove & install connectors/face ID cable. Used to IC reballing, flex cable repair and FPC soldering.Application rang..
Rs.330 Rs.459
Out Of Stock
Brand: Mechanic
Model: 1767
Operation Manual: Step 1. When the temperature of the nozzle is 300-360 ℃, the regenerative operation is performed. Step 2. Put the weld in the resurrection ointment and wait for a few seconds. Step 3. Clean welding nozzles with solder sponge or copper wire. Step 4. Tin is plated..
Rs.250
Out Of Stock
Brand: Mechanic
Model: 1002
How to USE : 1. The proper tip temperature is from 300°~360°C ( 572°F-680°F )2. Dip the tip in the TIP Refresher3. Put solder on the tip, Clean the tip completely with the sponge on the soldering iron stand ( good ST series ).4. Put solder on the tip again, now the tip wetting is restored..
Rs.150
Out Of Stock
Model: 1519
Polarizer Remover Bit Small ( For 30W Iron Without Blade )..
Rs.80