Atten Iron Tip Refresher ( AT - F10 )

How to USE  : 

1. The proper tip temperature is from 300°~360°C ( 572°F-680°F )
2. Dip the tip in the TIP Refresher.
3. Put solder on the tip, Clean the tip completely with the sponge on the soldering iron stand ( good ST series ).
4. Put solder on the tip again, now the tip wetting is restored and the tip is tinned , if the tip is till not wetting properly, repeat 2 and 3 Several times.

Package Content*

1x Iron Tip Cleaner  AT - F10