Disclaimer : We at G2Mark.com trying to help people by Arranging Home Oxygen Concentrator Machine ( 1L~7L ) Somehow in low rate to help people in this pandemic ongoing situation , We don't claim any medical certificate for this product. Please consult your medical advisor before using this Machine.
Features :
- Provides oxygen at 30 - 90 percent concentration based on flow rate from 1 ~ 7 LPM
- Built-in compact humidifier and timer function up to 30 minutes
- Operating noise is less than 43 DB and net weight is 7.5 Kg
- Safety plastic shell
- High concentration and stability, can meet the medical level requirements
- Stability: can work continuously for 480 hours oxygen concentration Compressor Oxygen flow rate Oxygen concentration: 1L can reach more than 90%
- Quiet and comfortable ,The positive 43D (A) (average)
- Oxygen bar for household Fashion appearance
- Compression pump life up to 8000 hours, strong stability
- High reverse display LCD screen, Easy to change screen, easier to Clean
- Infrared remote control oxygen generator in real time
- If the machine fails, the machine will automatically alarm, remind, every 100 hours will have a filter cleaning Real time
Description :
The YK300 is a compact, table-top oxygen generator for general use at home. It provides oxygen at 30% -90% based on flow rate from 1 – 5 LPM. The YU300 is used for relaxation, to recover from fatigue or exposure to high pollution. It has a built-in compact humidifier and timer function up to 30 minutes. The LCD display and buttons on the top of the device allow for easy control of the device. The screen is clear and easy to read, and the controls have an on/off switch, time plus, time minus, flow and anion. At the front of the machine there’s a water gauge with a maximum level indicator. Plastic casing is in white, with the top and bottom in black. It looks nice, for a medical device.
The YK300 model has a continuous flow rate of between 1 l/min to 7 l/min, with oxygen purity of up to 90%. As the flow increases, purity lowers – the machine can filter a limited volume of air. The adjustable flow rate is 1 LPM at 90%, 2 LPM at 65%, 3 LPM at 55%, 4 LPM at 45%, 5 LPM at 40%,6 LPM at 35%,7 LPM at 30%.
Direction to Use:
Perform the oxygen inhalation
- Push the “flow rate” button on the control panel to require oxygen, the display screen shows the flow rate and oxygen concentration. Meanwhile oxygen comes from the oxygen outlet.
- Connect the nasal oxygen cannula to the oxygen outlet of the humidifier, the other end matches the patient.
Time setting
- This machine has a timer function, which the user can set in the range of 10 - 120 minutes.
- When the LCD shows “--” it means continuous operation state
- Every press the “+” , means runtime increases 10 minutes, press for more than 1.5 seconds for continuous increasing
- Every press the “-” , means runtime decreases 10 minutes, press for more than 1.5 seconds for continuous decreasing
- The oxygen concentrator will automatically shut down, meanwhile LCD shows “0” when time runs out
Anions function
- Press the “anion” button on the control panel to generating anions of oxygen
Turning off
- Push the power switch on the control panel to suspend inhaling oxygen.
- Take off nasal oxygen cannula from oxygen outlet first, close power switch, and then cut off power source
Package Content*
- 1 x Oxygen concentration Unit
- 1 x Power Cable
- 1 x Remote Control
- 1 x Filter Sponge
- 1 x Headset Nasal Type Oxygen Cannula
- 1 x Twin Bore Nasal Type Oxygen Cannula
- 1 x Nebulizer Nasal Type Oxygen Cannula
Warranty :
- Non Returnable
- No Warranty
