Your Cart

Easy JTAG Plus Box Hardware V2.1 With 3 ISP Adaptor (Without Smart Card)

Easy JTAG Plus Box Hardware V2.1 With 3 ISP Adaptor (Without Smart Card)
New -22 %
Easy JTAG Plus Box Hardware V2.1 With 3 ISP Adaptor (Without Smart Card)
  • Stock Availibility: In Stock
  • Model: 2668
  • Weight: 0.40kg
2614 items sold
Chat via WhatsApp
(11AM - 6PM)
Tags: easy jtag

Easy JTAG Plus Box Hardware With 3 ISP Adaptor (Without Smart Card)

Z3x Easy Jtag Plus Box - Full Version With eMMC Socket, which boasts some MAJOR hardware improvements and Features including One click device repair, Boot repair, Data recovery, eMMC firmware repair, Partition management, eMMC service operations, SPI memory programming.

This Upgraded PLUS version features ultra-fast data transfer, has the possibility of increasing functionality in the future: hardware of the new box is ready to support new protocols like UFS* and NAND*.

Box Features

  • One click device repair
  • Boot repair
  • Data recovery
  • eMMC firmware repair
  • Partition management
  • eMMC service operations
  • SPI memory programming

Socket Features

  • Combining the top quality materials with the best engineering and elegantly designed hardware for the powerful eMMC Socket.
  • Made from the high-quality materials
  • Over 10K cycles of lifetime performance in your service centre
  • Wide range of eMMC IC supported by BGA153/169, BGA162/186, BGA221, BGA529
  • High-speed up to 30 MB per second over 8-bit bus.
  • EMI resistant design, low noise components
  • Integrated power logic. The additional power source is no more need
  • Surge protection - smart fuse driven (0.5A threshold)

Software Features


Free access to large dump and pinouts database and constantly updated software tools


The main application allowing you to use most of the product features. It's the most powerful tool of all


Lightweight software, made especially for mobile phones repair, eMMC memory chips replacement and user data recovery


Identifying, reading, writing, verifying and erasing flash chips. It is designed to flash BIOS images on mainboards, routers, e.t.c.


Create user customized repair packages. This is partition layout, pinout, eMMC pre-config and instructions


Access to most useful box functionality to create your own decisions

Main benefits of new Z3x Easy Jtag Plus Box

  • Updated CPU AT SAM3X8E vs LPC1768 in the old box.
  • Updated FPGA SPARTAN6 vs SPARTAN3 in the old box
  • Updated Power Logic – Full Digital PWM with ADC control.
  • MicroUSB Connector if additional power required.
  • VCC and VCCQ overload protection.
  • Updated host interface: USB 2.0 Device/Mini Host: 480 Mbps
  • Integrated ISP engine: Z3X High Power Pro Engine
  • ISP Support 1 and 4-bit connection now **
  • Added eMMC 8-bit high speed interface up to 48Mhz
  • Integrated NAND engine: NFC with 4 Kbyte RAM buffer and ECC
  • Integrated M-PHY interface.
  • Integrated SPI/I2C engine: up to 65 MHz for HSMCI and SPI clock lines
  • Integrated Self Test Core that exclude 90% faults in production.
  • Integrated CCID Card Reader for Z3X Software Use

What you get with new hardware :

  • Box to Host PC speed increase up to 35MB/sec
  • JTAG Interface speed increase 20%
  • eMMC ISP Speed increase up to 4MB/sec
  • eMMC 8 Bit Speed up to 26MB/sec
  • Compatibility with 99.9 host PC systems and OSes
  • Compatibility with old Easy JTAG G1 ISP adapters ( 1bit )
  • Adapter-less ISP ( all stuff inside the box )
  • Compatibility with all market popular eMMC sockets ( 8 bit )

Z3x Easy JTAG Plus Box Content

1x Easy JTAG Plus Box Main Interface Hardware V2.1

3x ISP Adapter

  • Jtag Rev 2.1 
  • 1-Bit ISP Rev 2.1
  • 4-Bit ISP Rev 2.1

1x USB A to B Cable

Write a review

Note: HTML is not translated!
Bad Good