G2mark RE-9506D+ Hot Air Gun Rework Station With Iron Station
Power Consumption : 700W
Air pump:DC motor,double turbine rotate out of the wind
Temperature control:100 to 450 degrees
Gas flow rate:50 litres/minute
Size:17 x 10.5 x 24 cm
Noise:less than 78db
1, linear air volume adjustment, mains have change the air volume can be stable, double vortex spinning wind, the wind is soft, no impact.
2, express of temperature, 3 seconds to reach the set temperature, temperature of liquid crystal display (LCD), intelligent sensor, automatic cooling, delay shutdown.
3, welding with plastic components, ringer, such as the tail inserted inline deformation, welding circuit board no bubbles. Shield does not change color
4, BGA chip is not easy to break.
1, suitable for a variety of components desoldering. Such as: SOIC, CHIP, QFP, PLCC, BGA, etc.
2, used in thermal shrinkage, drying, in addition to the paint, in addition to stick, thawing, preheating, disinfection, plastic welding, etc.
1 x SMD RE-9506D+
3 x Air nozzles
1x Iron Station